TM 9-2320-392-10-2
WRECKER HYDRAULIC SYSTEM TROUBLESHOOTING
0097 00
THIS WORK PACKAGE COVERS:
Wrecker Hydraulic System
INITIAL SETUP:
Maintenance Level
References - Continued
Operator
WP 0037 00
WP 0043 00
References
WP 0065 00
WP 0018 00
WP 0068 00
WP 0034 00
WP 0035 00
WRECKER HYDRAULIC SYSTEM
Table 1. Wrecker Hydraulic System Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CAUTION
Hydraulic oil level must not be above or more than 0.75 in. (1.9 cm) below
black line on hydraulic oil view gage. Failure to comply may result in damage
to equipment.
1.
M1089A1
1.
Check hydraulic oil
1.
If hydraulic oil view gage
MATERIAL
level at hydraulic
registers below black line,
HANDLING CRANE
oil view gage (WP
remove hydraulic tank cap
(MHC) DOES NOT
and fill hydraulic oil to
OPERATE
Item 9).
appropriate level (WP 0103
2.
Install hydraulic tank cap.
0097 00-1
