TM 9-2320-392-10-2
WRECKER HYDRAULIC SYSTEM
0097 00
TROUBLESHOOTING - Continued
WRECKER HYDRAULIC SYSTEM - Continued
Table 1. Wrecker Hydraulic System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CAUTION
Hydraulic oil level must not be above or more than 0.75 in. (1.9 cm) below
black line on hydraulic oil view gage. Failure to comply may result in damage
to equipment.
4.
M1089A1 LEFT 30K
2.
Check hydraulic oil
1.
If hydraulic oil view gage
WINCH DOES NOT
level at hydraulic
registers below black line,
OPERATE OR
oil view gage (WP
remove hydraulic tank cap
OPERATES
and fill hydraulic oil to
SLOWLY -
Item 9).
appropriate level (WP 0103
Continued
2.
Install hydraulic tank cap.
3.
Check to see if 15K
If 15K SRW does not operate,
SRW operates (WP
perform Wrecker Hydraulic
0065 00).
System Troubleshooting (WP
0096 00, Malfunction 2,
M1089A1 Stifflegs/Left 30K
Winch/15K Self-Recovery
Winch Do Not Operate).
4.
Check to see if left
If left 30K Winch does not
30K Winch
operate, notify Field
operates (WP 0035
Maintenance.
00).
0097 00-5
