TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
64. BACKUP LIGHT
3. If circuit breaker is tripped,
DOES NOT
push in to reset.
ILLUMINATE -
Continued
4. Position main light switch to
SER DRIVE (WP 0004 00)
5. Check circuit breaker to see if
it is tripped again. If circuit
breaker is tripped or trips
again, notify Field
Maintenance.
6. Position main light switch to
OFF (WP 0004 00).
7. Install PDP cover (WP 0113
2. Check to see if
If backup light does not
backup light
illuminate, notify Field
illuminates (WP 0018
Maintenance.
00).
65. BLACKOUT
1. Check circuit breaker
1. Remove PDP cover (WP 0113
MARKER LIGHTS
CB66 in PCB to see if
DO NOT
it is tripped.
ILLUMINATE
AND/OR WTEC III
TRANSMISSION
PUSHBUTTON
SHIFT SELECTOR
(TPSS) DOES NOT
DIM
2. If circuit breaker is tripped,
push in to reset.
0080 00-71
