TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
60 BLACKOUT DRIVE
2. Check circuit breaker
1. Remove PDP cover (WP 0113
LIGHT DOES NOT
CB54 in PCB to see if
ILLUMINATE -
it is tripped.
Continued
2. If circuit breaker is tripped,
push in to reset.
3. Position main light switch to
BO DRIVE (WP 0004 00).
4. Check circuit breaker to see if
it is tripped again. If circuit
breaker is tripped or trips
again, notify Field
Maintenance.
5. Position main light switch to
OFF (WP 0004 00).
6. Install PDP cover (WP 0113
3. Check to see if
If blackout drive light does not
blackout drive light
illuminate, notify Field
illuminates (WP 0018
Maintenance.
00).
0080 00-67
