TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
68. FRONT AND REAR
2. If circuit breaker is tripped,
TURN SIGNALS DO
push in to reset.
NOT ILLUMINATE -
Continued
3. Position main light switch to
SER DRIVE (WP 0004 00)
4. Check circuit breaker to see if
it is tripped again. If circuit
breaker is tripped or trips
again, Notify Field
Maintenance.
5. Position main light switch to
OFF (WP 0004 00).
6. Install PDP cover (WP 0113
4. Check to see if front
If front and rear turn signals
and rear turn signals
do not illuminate, notify Field
illuminate (WP 0007
Maintenance.
00).
69. LEFT OR RIGHT
1. Check to see if rear
If rear turn signals do not
FRONT TURN
turn signals
illuminate, perform Malfunction
SIGNAL DOES NOT
illuminate (WP 0007
68 (Front And Rear Turn
ILLUMINATE
00).
Signals Do Not Illuminate).
2. Check to see if left
If left and right front turn
and right front turn
signals do not illuminate, notify
signals illuminate
Field Maintenance.
(WP 0007 00).
70. ONE OR BOTH
1. Check to see if
If blackout stoplights do not
STOPLIGHTS DO
blackout stoplights
illuminate, perform Malfunction
NOT ILLUMINATE
illuminate (WP 0018
72 (Stoplights And Blackout
00).
Stoplights Do Not Illuminate).
0080 00-75
