TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
57. ALL FRONT
5. Check circuit breaker
1. Remove PDP cover (WP 0113
AND/OR REAR
CB80 in PCB to see if
MARKER LIGHTS
it is tripped.
DO NOT
ILLUMINATE IN
NORMAL MODE -
Continued
2. If circuit breaker is tripped,
push in to reset.
3. Position main light switch to
SER DRIVE (WP 0004 00).
4. Check circuit breaker to see if
it is tripped again. If circuit
breaker is tripped or trips
again, notify Field
Maintenance.
5. Position main light switch to
OFF (WP 0004 00).
6. Install PDP cover (WP 0113
0080 00-65
