TM 9-2320-392-10-1
AMBER WARNING LIGHT KIT
0070 00
INSTALLATION/REMOVAL - Continued
RAISE MAST (TO FULL HEIGHT) (M1089A1) - Continued
CAUTION
Ensure cable has enough slack after inner tube is raised to prevent cable
from rubbing against mast. Failure to comply may result in damage to
equipment.
6.
Lift up on handle (14) to raise inner tube (15) to full up position.
7.
Install pin (13) in mast (8).
8.
Install clevis pin (12) in pin (13).
9.
Install pin (17) in handle (14).
10. Install clevis pin (16) in pin (17).
0070 00-7
