TM 9-2320-392-10-1
AMBER WARNING LIGHT KIT
0070 00
INSTALLATION/REMOVAL - Continued
REMOVE AMBER WARNING LIGHT (M1089A1)
NOTE
Left and right side amber warning lights are removed the same way. Right
side shown.
1.
Remove clevis pin (6) and pin (7) from mast (8).
2.
Lift amber warning light (1) from mast (8).
3.
Disconnect connector J45 (10) from connector (12).
4.
Install dust dustcap (11) on connector J45 (10).
5.
Using lanyard (9), lower connector J45 (10) into mast (8).
6.
Install pin (7) in mast (8).
7.
Install clevis pin (6) in pin (7).
8.
Place amber warning light (1) in tool box.
END OF WORK PACKAGE.
0070 00-11/12 Blank
