TM 9-2320-392-10-1
AMBER WARNING LIGHT KIT
0070 00
INSTALLATION/REMOVAL - Continued
RAISE MAST (TO MID-POSITION) (M1089A1)
NOTE
Left and right side masts are raised the same way. Right side shown.
1.
Remove clevis pin (12) and pin (13) from mast (8).
CAUTION
Ensure cable has enough slack after inner tube is raised to prevent cable
from rubbing against mast. Failure to comply may result in damage to
equipment.
2.
Lift up on handle (14) to raise inner tube (15) to mid-position.
3.
Install pin (12) in mast (8).
4. Install clevis pin (12) in pin (13).
0070 00-5
