TM 9-2320-392-10-1
PREPARATION FOR INTERNAL AIR TRANSPORT,
0059 00
HIGHWAY, OR RAIL SHIPMENT Continued
COMPRESSING SUSPENSION Continued
11. Position SUSPENSION knob (15) to LOWER.
NOTE
Suspension is fully compressed when cylinder rod is fully retracted and safety
pins can be installed in compression cylinder.
Use back-up hydraulic pump (WP 0044 00) if pressing PUMP knob does not
accomplish step (13).
12. Press and hold PUMP knob (17) until suspension is fully compressed.
13. Install two safety pins (13) in compression cylinder (14).
14. Perform step (14) on left side of vehicle.
15. Lower cab (WP 0021 00).
0059 00-9
