TM 9-2320-392-10-1
PREPARATION FOR INTERNAL AIR TRANSPORT,
0059 00
HIGHWAY, OR RAIL SHIPMENT Continued
COMPRESSING SUSPENSION - Continued
NOTE
Use back-up hydraulic pump (WP 0044 00) if pressing PUMP knob does not
accomplish step (7).
7.
Press and hold PUMP knob (17) until suspension compression plate (12) can be
installed on axle stud (18).
WARNING
Both suspension compression plates must be installed on axle studs.
Failure to comply may result in serious injury or death to personnel.
NOTE
Left and right side suspension compression plates are installed on axle studs
the same way. Right side suspension compression plate shown.
8.
Install suspension compression plate (12) on axle stud (18).
9.
Install retaining pin (10) in axle stud (18).
10. Perform steps (8) and (9) on left side of vehicle.
0059 00-8
