TM 9-2320-392-10-1
M1089A1 MATERIAL HANDLING CRANE (MHC)
0043 00
OPERATION - Continued
ROTATE AND TELESCOPE BOOM
WARNING
Keep boom clear of all electrical lines and other obstacles while
operating Material Handling Crane (MHC). Failure to comply may
result in serious injury or death to personnel.
Area must be clear of personnel before operating swing or
telescoping boom. Boom must be rotated and telescoped slow
enough so Operator has control of load. If Operator cannot see load
during operation, operate Material Handling Crane (MHC) with
REMOTE CONTROL UNIT. Failure to comply may result in serious injury
or death to personnel.
NOTE
Operate MHC control levers using even pressure. Moving lever slightly will
cause slow movement MHC. Moving lever to full travel will cause faster
movement of MHC.
1.
Move SWING lever (38) to CW position to move boom (39) to the right.
2.
Move SWING lever (38) to CCW position to move boom (39) to the left.
0043 00-20
