TM 9-2320-392-10-1
M1084A1/M1086A1 MATERIAL HANDLING CRANE
0030 00
(MHC) OPERATION - Continued
RAISE BOOM TO OPERATING POSITION
WARNING
Wear heavy leather-palmed work gloves when handling cable.
Cables can become frayed or contain broken wires. Never let
moving cable slide through hands, even when wearing gloves.
Failure to comply may result in injury to personnel.
CAUTION
When disconnecting hook assembly from stowage ring, do not allow
excessive slack to build-up when paying out cable. Cable may get tangled on
drum. Failure to comply may result in damage to equipment.
1.
Position HOIST lever (22) to DOWN until there is enough slack in cable (23) to
disconnect hook assembly (24) from stowage ring (25).
2.
Remove safety pin (26) from hook assembly latch (27).
3.
Disconnect hook assembly (24) from stowage ring (25).
0030 00-9
