TM 9-2320-392-10-1
M1090A1 DUMP COVER KIT
0028 00
INSTALLATION/REMOVAL - Continued
RAISING REAR FLAP - Continued
NOTE
Steps 3 through 8 are performed from inside dump body.
3.
Pull drawstring (60) to raise rear flap (41).
4.
Wrap strap (61) around rear flap (41).
5.
Position strap (61) through D-rings (62).
6.
Adjust strap (61) as required.
7.
Repeat steps 4 through 6 for remaining four straps.
8.
Tie drawstring (60) to rear bow (11).
9.
Pull left side rear flap (40) over tailgate (49) and install shock cord (46) on J-hooks
(47).
10. Pull right side rear flap (38) over tailgate (49) and install shock cord (50) on J-hooks
(547.
0028 00-22
