TM 9-2320-366-20-5
Section II. MAINTENANCE PROCEDURES
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Instrument panel assembly removed for access (para
Tool Kit, Genl Mech (Item 46, Appendix C)
7-15).
a. Removal.
(1) Disconnect vacuum hose (1) from AIR FILTER
RESTRICTION GAUGE (2).
(2) Remove two screws (3) and AIR FILTER RESTRICTION
GAUGE faceplate (4) from instrument panel assembly
(5).
(3) Remove AIR FILTER RESTRICTION GAUGE (2) from
instrument panel assembly (5).
b. Installation.
(1) Position AIR FILTER RESTRICTION GAUGE (2) in
instrument panel assembly (5).
(2) Install AIR FILTER RESTRICTION GAUGE faceplate (4)
on instrument panel assembly (5) with two screws (3).
(3) Connect vacuum hose (1) to AIR FILTER RESTRICTION
GAUGE (2).
c. Follow-On Maintenance.
(1) Install instrument panel assembly (para 7-15).
(2) Start engine (TM 9-2320-366-10-1).
(3) Check operation of AIR FILTER RESTRICTION GAUGE.
(4) Shut down engine (TM 9-2320-366-10-1).
End of Task.
