TM 9-2320-366-20-5
NOTE
Vehicles may be equipped with either
corrosion enhanced clamps or non-
corrosion enhanced clamps. Corrosion
enhanced clamps have a self-locking nut
and cork lining. When removing a non-
corrosion enhanced clamp, replace it with
a corrosion enhanced clamp.
Perform steps (3) through (5) on vehicles
not equipped with corrosion enhanced
clamps.
(3) Remove two screws (5) from clamps (6).
NOTE
Note the orientation of wet tank prior to
removal.
(4) Remove wet tank (2) from two clamps (6).
(5) Remove two clamps (6) from battery box (7). Discard
clamps.
NOTE
Perform steps (6) and (7) on vehicles
equipped with corrosion enhanced clamps.
(6) Remove two self-locking nuts (8) from clamps (6).
Discard self-locking nuts.
NOTE
Note the orientation of wet tank prior to
removal.
(7) Remove wet tank (2) from two clamps (6).
Change 1
23-51
