TM 9-2320-366-20-5
23-11. AIR DRYER REPLACEMENT/REPAIR (CONT)
(4) Position spring (7), purge piston (6), purge valve seat
(8), and screw (9) on purge valve (4).
(5) Tighten screw (9) to 50-80 lb-in. (6-9 Nm).
(6) Position purge valve (4) in lower cover (2).
(7) Install nut in purge valve (4).
(8) Tighten purge valve (4) to 35-50 lb-in. (4-6 Nm).
(9) Remove nut from purge valve (4).
(10) Position exhaust boot (10) and purge exhaust fitting (11)
on lower cover (2) with three screws (12).
(11) Tighten three screws (12) to 50-70 lb-in. (6-8 Nm).
Change 1
