TM 9-2320-366-20-5
(66) Connect terminal lug TL14 (102) to terminal block
TB2 connector 43 (103).
NOTE
Other terminal lugs are present at this
location.
(67) Remove nut (104), lockwasher (105), and washer
(106) from ground stud (107).
(68) Install terminal lug TL21 (108) on ground stud (107)
with washer (106), lockwasher (105), and nut (104).
b. Follow-on Maintenance
(1) Install power distribution panel (para 7-11 WTEC II,
Para 7-13 WTEC III).
(2) Install kick panel (para 16-3).
(3) Connect batteries (para 7-57).
(4) Install RH seat (para 7-57)
(5)
Operate equipment, check for proper operation.
End of Task
Change 2
20-513
