TM 9-2320-366-20-5
(45) Install terminal lug TL16 (65) on stud (66) with
washer (67) and nut (68).
(46) Install dust boot (69) on stud (66).
(47) Position electrical distribution block cover (70) on
power distribution shelf (45).
(48) Tighten wing screw (71) on electrical distribution
block cover (70).
(49) Install wing screw (72) in electrical distribution block
cover (70).
(50) Install circuit breaker CB11 (73) on dashboard (74)
with two screws (75).
(51) Install terminal lug TL24 (76) on stud (77) with
washer (78) and nut (79).
(52) Install dust boot (80) on stud (77).
Change 2
20-509
