TM 9-2320-366-20-5
This task covers:
a.
Removal
e.
Winch Assembly
b.
Base Plate Disassembly
f.
Base Plate Assembly
c.
Winch Disassembly
g.
Installation
d.
Cleaning/Inspection
h.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
LMHC weight block and wire rope removed (para 20-
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
LMHC power cable removed (TM 9-2320-366-10-1).
Solvent, Dry Cleaning (Item 65, Appendix D)
LMHC remote control cable removed (TM 9-2320-366-
Grease, Molybdenum Disulfide (Item 24,
10-1).
Rag, Wiping (Item 50, Appendix D)
Gasket (3) (Item 27, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Personnel Required
Gloves, Rubber (Item 13, Appendix C)
(2)
a. Removal.
(1) Loosen four screws (1) on winch (2).
NOTE
Step (2) and (3) require the aid of an
assistant.
(2) Slide winch (2) to rear of boom (3).
(3) Remove winch (2) from boom (3).
