TM 9-2320-366-20-5
20-60. LIGHT MATERIAL HANDLING CRANE (LMHC) ASSEMBLY/DISASSEMBLY
(CONT)
b. Disassembly.
(1) Position boom in the 0-degree position (TM 9-2320-366-
10-1).
(2) Remove two nuts (1), screws (2), lockwashers (5), and
weight blocks (3) from winch cable (4).
Discard
lockwashers.
NOTE
Perform step (3) for stowage of weight block.
(3) Install two screws (2) in weight blocks (3) with
lockwashers (5) and nuts (1).
(4) Remove quick release pin (6) from boom (7).
(5) Remove winch cable (5) from boom sheave (8).
(6) Install quick release pin (6) in boom (7).
(7) Retract winch cable approximately 6 feet (1.8 m).
(8) Disconnect remote control and power cables (TM 9-
2320-366-10-1).
(9) Loosen four screws (9) on winch (10).
(10) Slide winch (10) to rear of boom (7).
(11) Remove winch (10) from boom (7).
20-334
