TM 9-2320-366-20-5
20-59. M1089 FUEL/WATER CAN BRACKET KIT INSTALLATION/REMOVAL (CONT)
(21) Position four washers (33) and rear bracket (34) on left
catwalk (2) with four washers (35), screws (36), washers
(37), and self-locking nuts (38).
NOTE
Step (22) requires the aid of an assistant.
(22) Tighten four self-locking nuts (38) to 31-39 lb-ft (42-55
Nm).
b. Removal.
(1) Remove four self-locking nuts (1), washers (2), screws
(3), washers (4), rear bracket (5) and four washers (6)
from left catwalk (7). Discard self-locking nuts.
(2) Remove four self-locking nuts (8), washers (9), screws
(10 and 11), washers (12), front bracket (13), and four
washers (14) from left catwalk (7). Discard self-locking
nuts.
c. Follow-On Maintenance.
Install left catwalk (after fuel/water can bracket kit
installation) (para 14-4).
End of Task.
20-330