TM 9-2320-366-20-5
(8) Position winch (10) on boom (8).
(9) Slide winch (10) to front of boom (8).
(10) Tighten four screws (11) on winch (10).
(11) Connect power and remote control cables (TM 9-2320-
366-10-1).
(12) Extend winch cable (12) approximately 6 feet (1.8 m).
(13) Remove quick release pin (13) from boom (8).
(14) Position winch cable (12) on boom sheave (14).
(15) Install quick release pin (13) in boom (8).
(16) Remove two nuts (15), lockwashers (16), and screws
(17) from weight blocks (18). Discard lockwashers.
(17) Install two weight blocks (18) on winch cable (12) with
two screws (17), lockwashers (16), and nuts (15).
(18) Position boom in stowed position (TM 9-2320-366-10-1).
20-333
