TM 9-2320-366-20-5
(15) Remove two self-locking nuts (23), washers (24), screws
(25), and support plate (21) from base plate (26).
Discard self-locking nuts.
(16) Remove two sections of resilient mounts (27) from each
side of support plate (21). Discard resilient mounts.
(17) Remove four self-locking nuts (28), spacers (29), cushion
(30), resilient mount (31), and four screws (32) from two
front brackets (33). Discard self-locking nuts.
c. Manifold Disassembly.
(1) Place manifold (1) in vise.
(2) Match mark 45-degree fitting (2) to manifold (1).
(3) Remove 45-degree fitting (2) and 90-degree fitting (3)
from manifold.
(4) Match mark two 45-degree fittings (4) to manifold (1).
(5) Remove two 45-degree fittings (4) from manifold (1).
19-103
