TM 9-2320-366-20-5
(14) Remove two plugs (26) and filters (27) from hydraulic
manifold (2). Discard filters.
(15) Remove two preformed packings (28) from plugs (26).
Discard preformed packings.
(16) Remove plug (29), setscrew (30), spacer (31), preformed
packing (32), and check valve (33) from CV1 orifice (34).
Discard preformed packing.
(17) Remove cartridge valve (35) from hydraulic manifold (2).
(18) Remove preformed packings (36, 37, and 38) and back-
up rings (39 and 40) from cartridge valve (35). Discard
preformed packings and back-up rings.
NOTE
Top three manifold valves are two position
valves. Bottom manifold valve is a three
position. Note position of manifold valves
and retainer rings prior to removal.
(19) Remove four nuts (41), name plates (42), knobs (43),
springs (44), spacers (45), retainer rings (46), and dust
boots (47) from manifold valves (48).
(20) Remove four manifold valves (48) from hydraulic
manifold (2).
Change 1
19-20.7
