TM 9-2320-366-20-5
19-4. HYDRAULIC MANIFOLD REPLACEMENT/REPAIR (CONT)
(30) Install eight preformed packings (55) on fittings (56).
(31) Install eight fittings (56) in hydraulic manifold (2).
(32) Install two preformed packings (57) on 45-degree fittings
(58).
(33) Install two 45-degree fittings (58) in hydraulic manifold
(2).
(34) Position spacer (59) on hydraulic manifold (2) with three
screws (60).
(35) Tighten three screws (60) to 72-120 lb-in. (8-14 Nm).
(36) Position hinge (61) on plate (59) with two screws (62).
(37) Tighten two screws (62) to 18-22 lb-ft (24-30 Nm).
(38) Position spacer (63) and cover (64) on hinge (61) with
two screws (65) and self-locking nuts (66).
(39) Tighten two self-locking nuts (66) to 18-22 lb-ft (24-30
Nm).
19-20.4
Change 1
