TM 9-2320-366-20-5
(40) Position plate (67) and lanyard (68) on hydraulic
manifold (2) with two screws (69).
(41) Tighten two screws (69) to 18-22 lb-ft (24-30 Nm).
(42) Close cover (64) and install retaining pin (70).
d. Disassembly (PN 65234).
(1) Remove retaining pin (1) from hydraulic manifold (2) and
open cover (3).
(2) Remove two screws (4), lanyard (5), and plate (6) from
hydraulic manifold (2).
NOTE
Note position of spacer prior to removal.
(3) Remove two self-locking nuts (7), screws (8), spacer (9),
and cover (3) from hinge (10). Discard self-locking nuts.
(4) Remove two screws (11), hinge (10), three screws (12),
and plate (13) from hydraulic manifold (2).
Change 1
19-20.5
