TM 9-2320-366-20-5
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Engine shut down (TM 9-2320-366-10-1).
Tool Kit, Genl Mech (Item 79, Appendix C)
Wrench, Torque 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
a. Removal.
Remove four screws (1), washers (2), and personnel heater
control guard (3) from personnel heater (4).
b. Installation
NOTE
Perform step (1) on vehicles not equipped
with personnel heater guard.
(1) Remove four screws (1) from personnel heater (2).
Discard screws.
