TM 9-2320-366-20-5
18-9. PERSONNEL HEATER REPLACEMENT/REPAIR (CONT)
(68) Position fan switch knob (85) on fan switch (49).
(69) Tighten two set screws (86) on fan switch knob (85).
e. Installation.
NOTE
Install plastic cable ties as required.
(1) Position personnel heater (1) in vehicle.
(2) Position heater outlet hose (2) and heater inlet hose (3)
through cab floor (4).
(3) Connect connector PX25 (5) to personnel heater
connector (6).
(4) Connect connector clamp (7) on personnel heater
connector (6).
(5) Position personnel heater (1) in mounting position.
18-54
