TM 9-2320-366-20-5
18-9. PERSONNEL HEATER REPLACEMENT/REPAIR (CONT)
(48) Position HEAT control cable (57) on valve shaft (62) with
matchmarks aligned.
(49) Install cable clamp (63) on valve (61) with screw (64).
(50) Install push nut (65) on valve shaft (62).
(51) Position clamp (66) on hose (67).
(52) Connect hose (67) to valve (61).
(53) Tighten clamp (66) to 35-45 lb-in. (4-5 Nm).
(54) Position hose (68) in personnel heater (2).
(55) Install seal (69) on personnel heater coil (70).
(56) Position personnel heater coil (70) in personnel heater
(2).
(57) Position clamps (71 and 72) on hoses (67 and 68).
(58) Connect hoses (67 and 68) to personnel heater coil (70).
(59) Tighten clamps (71 and 72) to 35-45 lb-in. (4-5 Nm).
