TM 9-2320-366-20-5
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Solvent, Dry Cleaning (Item 65, Appendix D)
Pan, Drain (Item 24, Appendix C)
Rag, Wiping (Item 50, Appendix D)
Goggles, Industrial (Item 15, Appendix C)
Parts Kit, Hydraulic Pump (Item 219, Appendix G)
Gloves, Rubber (Item 13, Appendix C)
Lockwasher (4) (Item 96, Appendix G)
Packing, Preformed (4) (Item 187, Appendix G)
Gasket and Preformed Packing Kit (Item 43,
a. Removal.
(1) Position drain pan under hand pump (1).
CAUTION
Cap or plug hydraulic tube and hose to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Tag tube and hose connection points prior to
disconnecting.
(2) Disconnect hydraulic hose (2) from 90-degree fitting (3).
(3) Disconnect hydraulic tube (4) from 90-degree fitting (5).
