TM 9-2320-366-20-5
17-10. M1084/M1086 HAND PUMP REPAIR (CONT)
(4) Remove four screws (6), lockwashers (7), washers (8)
and hand pump (1) from bracket (9).
Discard
(5) Match mark 90-degree fittings (3 and 5) to hand pump
(1).
(6) Remove 90-degree fittings (3 and 5) from hand pump
(1).
(7) Remove four preformed packings (10) from 90-degree
fittings (3 and 5). Discard preformed packings.
b. Disassembly.
WARNING
Retaining clips are under tension and can
act as projectiles when released causing
severe eye injury.
Use care when
removing retaining clips.
Failure to
comply may result in injury to personnel.
(1) Remove two retaining clips (1) and pin (2) from pump
linkage (3).
(2) Remove pump piston (4) from pump base (5).
(3) Remove two retaining clips (6), pin (7), and pump socket
(8) from pump piston (4).
(4) Remove two retaining clips (9), pin (10), and pump
linkage (3) from pump base (5).
17-38
