TM 9-2320-366-20-4
ADJUSTMENT
This task covers:
a.
Ladder Disassembly
e.
Rear Brackets Removal
b.
Ladder Assembly
f.
Rear Brackets Installation
c.
Front Bracket Removal
g.
Latch Adjustment
d.
Front Bracket Installation
h.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts (Cont)
Ladder removed (TM 9-2320-366-10-1).
Rivet, Blind (3) (Front Bracket) (Item 251,
Nut, Self-Locking (4) (Front Bracket) (Item 151,
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Rivet, Blind (18) (Ladder) (Item 243, Appendix
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
Rivet, Blind (2) (Right Rear Bracket) (Item 250,
Tool Kit, Blind Rivet (Item 44, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Rivet, Blind (2) (Right Rear Bracket) (Item 253,
Drill Set, Twist (Item 6, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Rivet, Blind (4) (Right Rear Bracket) (Item 247,
Nut, Self-Locking (Right Rear Bracket) (Item
Materials/Parts
Sealing Compound (Item 60, Appendix D)
150, Appendix G)
Rivet, Blind (4) (Front Bracket) (Item 247, Appendix G)
Nut, Self-Locking (4) (Left Rear Bracket) (Item
Rivet, Blind (2) (Front Bracket) (Item 249, Appendix G)
160, Appendix G)
a. Ladder Disassembly.
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may
result in injury to personnel.
(1) Remove six rivets (1) and two wear pads (2) from ladder
(3).
