TM 9-2320-366-20-4
This task covers:
a.Removal
c. Follow-On Maintenance
b.Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Tool Kit, Genl Mech (Item 46, Appendix C)
Hinges opened (TM 9-2320-366-10-1).
Sling, Cargo (Item 69, Appendix C)
Tools and Special Tools
Materials/Parts
Drill, Portable, Electric (Item 7, Appendix C)
Rivet, Blind (2) (Item 246, Appendix G)
Drill, Set, Twist (Item 6, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Personnel Required
Tool Kit, Blind Rivet (Item 44, Appendix C)
(2)
a. Removal.
WARNING
Tailgate assembly weighs approximately
270 lbs (123 Kgs). Attach a suitable
lifting device prior to removal. Failure to
comply may result in injury to personnel
or damage to equipment.
NOTE
Left and right side pins are removed the
same way. Right side shown.
(1) Remove two pins (1) from hitch pins (2).
(2) Remove two hitch pins (2) from tailgate (3).
(3) Perform steps (1) and (2) on left side of tailgate (3).
Change 2
