TM 9-2320-366-20-4
(11) Remove window crank (6) from window regulator (1).
(12) Fold out rear view mirror (12).
NOTE
Position door lining inside of strip at bottom
of door.
(13) Position door lining (13) on door (2).
(14) Install 12 rivets (14) in door lining (13).
(15) Position latch (15) on door (2) with two screws (16).
(16) Tighten two screws (16) to 65-121 lb-in. (10-14 Nm).
(17) Install knob (17) on lock stud (18).
Change 1
16-42.1/(16-42.2 Blank)
