TM 9-2320-366-20-4
14-7. M1088 UPPER PLATFORM REPLACEMENT (CONT)
d. Installation
NOTE
Vehicle serial numbers 0001 through 2359 were
not originally equipped with gladhand selector
valves. Vehicle serial numbers 2360 and higher
are equipped with gladhand selector valves.
M1088 with gladhand selector valves shown.
Step (1) requires the aid of an assistant.
(1) Position upper platform (1) on platform (2) with two
screws (3) and self-locking nuts (4).
(2) Position two screws (5) and self-locking nuts (6) in upper
platform (1).
(3) Tighten two self-locking nuts (4) to 45-55 lb-ft (61-75
Nm).
(4) Tighten two self-locking nuts (6) to 75-91 lb-ft (102-123
Nm).
NOTE
Perform steps (5) and (7) on vehicles
equipped with gladhand selector valves.
(5) Connect hose (7) to 90-degree fitting (8).
(6) Connect hose (9) to 90-degree fitting (10).
(7) Connect two air hoses (11) to 45-degree fittings (12).
14-56
