TM 9-2320-366-20-4
(5) Install filter (9) in air compressor governor (8).
(6) Install caged spring assembly (10) in air compressor
governor (8) with retaining ring (11).
(7) Install preformed packing (12) and cover (13) on air
compressor governor (8).
e. Installation.
(1) Position gasket (1) and air compressor governor (2) on
air compressor (3) with two screws (4).
(2) Tighten two screws (4) to 110-150 lb-in. (12-17 Nm).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(3) Apply sealing compound to threads of two fittings (5).
(4) Install two fittings (5) in air compressor governor (2).
Change 1
11-186.3
