TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Antiseize Compound (Item 58, Appendix D)
Cab raised (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Air tanks drained (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Adhesive (Item 8, Appendix D)
Lockwasher (2) (Item 93, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Adhesive (Item 10.1, Appendix D)
a. Removal.
NOTE
Perform step (1) on vehicle serial number 7448
and higher and vehicle serial numbers 0001
through 7447 that have previously had front
lights cable assembly replaced.
Tag wires, air hoses, and connection points prior
to removal.
(1) Remove adhesive and boot (1) from low pressure
transmitter (1.1).
(1.1) Remove adhesive, two nuts (2), lockwashers (3), and
terminal lugs TL201 (4) and TL202 (5) from low pressure
transmitter (1.1). Discard lockwashers.
(2) Disconnect two air hoses (6) from tee fitting (7).
(3) Disconnect air hose (8) from fitting (9).
(4) Disconnect air hose (10) from 90-degree fitting (11).
Change 1
