TM 9-2320-366-20-4
d. M1089 Pressure Protection Valve Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of pipe nipple (1).
(2) Install pipe nipple (1) in pressure protection valve (2).
(3) Apply antiseize compound to threads of tee fitting (3).
(4) Install tee fitting (3) in pressure protection valve (2).
(5) Apply antiseize compound to threads of tee fitting (4).
(6) Install tee fitting (4) in tee fitting (3).
(7) Apply antiseize compound to threads of bushing (5).
(8) Install bushing (5) in tee fitting (3).
(9) Apply antiseize compound to threads of 90-degree fitting
(6).
(10) Install 90-degree fitting (6) in bushing (5).
(11) Apply antiseize compound to threads of fitting (7).
(12) Install fitting (7) in 90-degree fitting (6).
11-175