TM 9-2320-366-20-4
This task covers:
a. Brake Air Hose Locations
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Air tanks drained (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
a. Brake Air Hose Locations
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
CAUTION
Cap or plug hose connections to prevent contamination. Failure to comply may result in damage to
equipment.
NOTE
This task shows locations of hoses on the vehicle. It may not be necessary to remove all hoses at one
time.
Tag hoses and connection points prior to removal.
Note location of plastic cable ties prior to removal.
Remove plastic cable ties as required.
Inspect hoses and fittings for cracks, kinks, nicks, stripped threads, and cuts. Replace damaged parts.
