TM 9-2320-366-20-4
11-20. SYSTEM PARK AND TRAILER AIR SUPPLY VALVES REPLACEMENT (CONT)
(3) Connect four air hoses (3) to 90-degree fittings (1).
(4) Position TRAILER AIR SUPPLY valve (2) in personnel
heater assembly (4).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(5) Apply antiseize compound to threads of four 90-degree
fittings (5), two run tee fittings (6), and 90-degree fittings
(7).
(6) Install four 90-degree fittings (5) in two run tee fittings
(6).
(7) Install two run tee fittings (6) in SYSTEM PARK valve
(8).
(8) Install two 90-degree fittings (7) in SYSTEM PARK valve
(8).
Change 1
