TM 9-2320-366-20-4
11-18. AIR BRAKE PROTECTING VALVE REPLACEMENT (CONT)
NOTE
Note orientation of fittings and plug prior to
removal.
(5) Remove two run tee fittings (2) from air brake protecting
valve (10).
(6) Remove two 45-degree fittings (4) from tee fitting (12).
(7) Remove tee fitting (12) from air brake protecting valve
(10).
(8) Remove three 90-degree fittings (6) from air brake
protecting valve (10).
(9) Remove plug (13) from air brake protecting valve (10).
d. M1088 Air Brake Protecting Valve Installation (Without
Gladhand Selector Valves).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of plug (1), three
90-degree fittings (2), tee fitting (3), two 45-degree
fittings (4), and run tee fittings (5).
(2) Install plug (1) in air brake protecting valve (6).
(3) Install three 90-degree fittings (2) in air brake protecting
valve (6).
(4) Install tee fitting (3) in air brake protecting valve (6).
(5) Install two 45-degree fittings (4) in tee fitting (3).
(6) Install two run tee fittings (5) in air brake protecting valve
(6).
11-102
