TM 9-2320-366-20-4
NOTE
Note orientation of fittings and plug prior to
removal.
(5) Remove run tee fitting (2) from air brake protecting valve
(10).
(6) Remove two 45-degree fittings (3) from air brake
protecting valve (10).
(7) Remove three 90-degree fittings (5) from air brake
protecting valve (10).
(8) Remove plug (12) from air brake protecting valve (10).
f. M1088 Air Brake Protecting Valve Installation (With
Gladhand Selector Valves).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of plug (1), three
90-degree fittings (2), two 45-degree fittings (3), and run
tee fitting (4).
(2) Install plug (1) in air brake protecting valve (5).
(3) Install three 90-degree fittings (2) in air brake protecting
valve (5).
(4) Install two 45-degree fittings (3) in air brake protecting
valve (5).
(5) Install run tee fitting (4) in air brake protecting valve (5).
11-105