TM 9-2320-366-20-4
b. Air Brake Protecting Valve Installation (All models
except M1088).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of plug (1), bushing
(1.1), relief valve (2), run tee fitting (3), two 45-degree
fittings (4), 90-degree fitting (5) and fitting (6).
(2) Install plug (1) in air brake protecting valve (7).
(2.1) Install bushing (1.1) in air brake protecting valve (7).
(3) Install relief valve (2) in air brake protecting valve (7).
(4) Install run tee fitting (3) in air brake protecting valve (7).
(5) Install two 45-degree fittings (4) in air brake protect-ing
valve (7).
(6) Install 90-degree fitting (5) in air brake protecting valve
(7).
(7) Install fitting (6) in air brake protecting valve (7).
Change 1
11-99
