TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Ties, Cable, Plastic (Item 69, Appendix D)
Pan, Drain (Item 24, Appendix C)
Nut, Self-Locking (2) (Item 128, Appendix G)
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (2) (Item 136, Appendix G)
Wrench, Torque, 0-200 lb in. (Item 59,
Nut, Self-Locking (4) (Item 150, Appendix G)
Nut, Self-Locking (10) (Item 154, Appendix G)
Nut, Self-Locking (4) (Item 161, Appendix G)
Nut, Self-Locking (8) (Item 167, Appendix G)
Nut, Self-Locking (2) (Item 168, Appendix G)
Washer, Spring (8) Item 292, Appendix G)
Wrench Set, Socket (Item 51, Appendix C)
Packing, Preformed (2) (Item 178.1, Appendix G)
Socket Set, Socket Wrench (Item 34, Appendix
Packing, Preformed (4) (Item 179, Appendix G)
Crowfoot Attachment, Socket Wrench (Item
Personnel Required
12.1, Appendix B)
(2)
WARNING
Wear appropriate eye protection when working under vehicle due to the
possibility of falling debris. Failure to comply may result in injury to
personnel.
Ensure exhaust system is cool before preforming maintenance. Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
Cap or plug hoses and fittings when disconnecting to prevent contamination of
transmission oil. Failure to comply may result in damage to equipment.
NOTE
Tag hoses and fittings prior to disconnecting.
Remove plastic cable ties as required.
Change 1
