TM 9-2320-366-20-4
8-12. M1088 TRANSMISSION AUXILIARY OIL COOLER AND BRACKET
REPLACEMENT (CONT)
(8) Position transmission auxiliary oil cooler (14) in right and
left transmission auxiliary oil cooler frames (2 and 5) with
six washers (17), spring washers (18), and self-locking
nuts (19).
(9) Tighten six self-locking nuts (19) to 20-25 lb-ft (27-34
Nm).
(10) Connect connectors P209A and P209B (20 and 21) to
connectors J209A and J209B (22 and 23).
(11) Connect two connector clamps (24) on connectors
J209A and J209B (22 and 23).
(12) Position bracket (25) on left transmission auxiliary oil
cooler frame (5) with screw (26) and self-locking nut
(27).
(13) Position clamp (28) on transmission auxiliary oil cooler
hose (29).
(14) Position clamp (28) on bracket (25) with screw (30) and
self-locking nut (31).
(15) Tighten self-locking nuts (27 and 31) to 84-132 lb-in. (9-
15 Nm).
8-58
Change 1
