TM 9-2320-366-20-4
(40) Install clamp (61) on rear lights cable assembly (1).
(41) Install clamp (61) on bracket (62) with screw (63) and
self-locking nut (64).
(42) Tighten self-locking nut (64) to 84-108 lb-in. (10-12 Nm).
(43) Remove self-locking nut (65), screw (66), and clamp (67)
from right frame rail (18). Discard self-locking nut.
(44) Install terminal lugs TL93 (68), TL92 (69), and clamp
(67) on right frame rail (18) with screw (66) and self-
locking nut (65).
(45) Tighten self-locking nut (65) to 84-108 lb-in. (10-12 Nm).
NOTE
Right and left sides of rear lights cable
assembly are pulled through catwalk frame
the same way. Left side shown.
(46) Pull left side of rear lights cable assembly (1) through
support structure rail (70).
Change 1
7-737
