TM 9-2320-366-20-4
7-136. TRANSMISSION AUXILIARY OIL COOLER FAN CABLE ASSEMBLY
REPLACEMENT (CONT)
(18) Position front grille (25) on cab (24) with washer (26)
and screw (27).
(19) Position two washers (28) and screws (29) in front grille
(25).
(20) Tighten screw (27) to 48-60 lb-in. (5-7 Nm).
(21) Tighten two screws (29) to 24 lb-in. (3 Nm).
(22) Position transmission auxiliary oil cooler fan cable
assembly (1) in dashboard (30).
(23) Connect connector P912 (31) to connector J912 (32).
g. Follow-On Maintenance.
(1) Lower dump body (M1090/M1094) (TM 9-2320-366-10-
1).
(2) Install personnel heater (c. thru f.) (para 18-9).
(3) Install kick panel (c. thru f.) (para 16-3).
(4) Connect batteries (para 7-57).
(5) Start engine (TM 9-2320-366-10-1).
(6) Check operation of transmission auxiliary oil cooler fan(s)
(TM 9-2320-366-10-1).
(7) Shut down engine (TM 9-2320-366-10-1).
End of Task.
7-684
