TM 9-2320-366-20-4
7-136. TRANSMISSION AUXILIARY OIL COOLER FAN CABLE ASSEMBLY
REPLACEMENT (CONT)
f. Installation (M1088 w/o winch).
NOTE
Install plastic cable ties as required.
(1) Position transmission auxiliary oil cooler fan cable
assembly (1) on vehicle.
(2) Connect connector P209B (2) to connector J209B (3).
(3) Connect connector P209A (4) to connector J209A (5).
(4) Connect connector clamps (6) on connectors P209B (2)
and P209A (4).
(5) Position clamp (7) on transmission auxiliary oil cooler fan
cable assembly (1).
(6) Position terminal lugs TL101 (8) and TL83 (9) and clamp
(7) on frame rail (10) with self-locking nut (11).
(7) Tighten self-locking nut (11) to 84-108 lb-in. (10-12 Nm).
(8) Position transmission auxiliary oil cooler fan cable
assembly (1) in clamp (12).
(9) Position clamp (12) on frame rail (10) with screw (13)
and self-locking nut (14).
(10) Tighten self-locking nut (14) to 120-144 lb-in. (14-16
Nm).
(11) Tighten two screws (15) in heat shield assembly (16).
7-682
