TM 9-2320-366-20-4
(13) Position transmission auxiliary oil cooler fan cable
assembly (1) in clamp (17).
(14) Position clamp (17) on frame rail (10) with screw (18)
and self-locking nut (19).
(15) Tighten self-locking nut (19) to 120-144 lb-in. (14-16
Nm).
(16) Tighten two screws (20) in heat shield assembly (21).
(17) Install suspension compression plate (22) on suspension
compression plate stud (23) with spring pin (24).
(18) Position transmission auxiliary oil cooler fan cable
assembly (1) in clamp (25).
(19) Position clamps (25 and 26) on frame rail (10) with
screw (27) and self-locking nut (28).
(20) Tighten self-locking nut (28) to 120-144 lb-in. (14-16
Nm).
7-677
